Safety Standards Act

[SBC 2003]  CHAPTER 39

Changes Not in Force

Section Change Citation Into force
3  am  2008-36-201  by reg 
91.1   rep   2003-39-91.1(4)   on the date set by reg  
 

Changes in Force

Section Change Citation Effective date
18  am  2007-14-215,Sch  1 Dec 2007 (BC Reg 354/07) 
19.1 to 19.4  en  2006-31-1  23 Jun 2006 (BC Reg 190/06) 
44  am  2007-14-60  18 Oct 2007 (BC Reg 311/07) 
80  am  2006-31-2  23 Jun 2006 (BC Reg 190/06) 
88  am  2006-31-3  23 Jun 2006 (BC Reg 190/06) 
  am  2007-14-215,Sch  1 Dec 2007 (BC Reg 354/07) 
 

Explanatory Note for Table of Legislative Changes – 2nd Edition

This Table of Legislative Changes (TLC – 2nd Edition) shows any Act provisions and changes

See the TLC – 1st Edition for all not-in-force and in-force provisions and changes, if any, from the 1997-2004 period and from RS1996 Act Supplements.

This Table may have 1, 2 or 3 parts: "Changes by Regulation" or "Order" (italics) lists provisions authorizing changes by regulation or order in council, "Changes Not in Force" (italics) identifies changes that are not in force, and "Changes in Force" identifies changes that are effective, as of the date of this Table.

The "Section" column identifies sections of the Act affected by changes; sections not changed are not listed. The "Change" column shows the nature of the changes (see abbreviations below). The "Citation" column cites the enactments making the changes. The "Into force" column (under "Changes Not in Force") shows how changes are to come into force. The "Effective date" column (under "Changes in Force") indicates when changes have come into force.

Abbreviations commonly used:

am = amended
conseq = consequential
Div = Division
eff = effect(ive)
en = enacted
hdg = heading
per = under, pursuant to
RA = Royal Assent
re-en = re-enacted (repealed and replaced)
reg = regulation
rem = remainder
rep = repealed
retro = retroactive
Supp = Supplement

The Users Guide to the looseleaf B.C. statutes gives detailed information about Tables of Legislative Changes.